Select from the list below for specific instructions and tips for installing NO-COAT products. In addition, be sure to check out NO-COAT® ULTRATOOLS™, for faster drywall corner installations and flawless results.
If you have additional questions regarding how to install drywall corners, please contact us directly at 1-888-662-6281 or info@no-coat.com.
|
ULTRAFLEX™ |
|
ULTRATRIM™ (formerly SmartSeries™) |
|
ULTRA ARCH™ |
NO-COAT® WARRANTY INSTALLATION INSTRUCTIONS
1. Apply a generous amount of approved joint compound to a clean, dry surface of drywall.
2. Place the NO-COAT corner onto wet joint compound and press on firmly.
3. Using a stiff 4 inch to 6 inch taping knife or an appropriate NO-COAT roller, wipe very hard, squishing the excess mud out from behind the NO-COAT corner and embedding the mud into both the paper fibers of the drywall board and the joint tape paper surface of the NO-COAT corner. NO-COAT has a number of installation rollers available to help insure proper embedding, depending on the product used.
The process described above is the most important part of drywall corner installation and must be followed correctly for the warranty to apply.
For specific information regarding drywall finishing levels, please refer to Recommended Levels of Gypsum Board Finish.
